New 3D printed models from Lothian Railway Models

To assist modellers plan and build a Caledonian Railway layout with the appropriate stock. A list/catalogue of supplies and components is available to members in the Association Resources section of the Forum below.
Post Reply
RossB
Posts: 201
Joined: Mon Aug 20, 2012 6:53 pm

New 3D printed models from Lothian Railway Models

Post by RossB »

I will shortly be launching my new range of 3D printed models in 4mm and 7mm called Lothian Railway Models. This is something I have been working on for the last couple of years and will cover a range of prototypes including wagons, trams and scenic items. My intention is that my 3D printed Caledonian models will continue to be available through True Line Models and will develop and expand in tandem with LRM.

Ross Burns

https://www.lothianrailwaymodels.com/
hugh gibb
Posts: 21
Joined: Tue Aug 24, 2021 1:34 pm

Re: New 3D printed models from Lothian Railway Models

Post by hugh gibb »

Well done Ross - Very impressed with what you are planning and I hope that you get the support it deserves
Jim Summers
Posts: 1190
Joined: Tue Aug 14, 2012 9:54 pm

Re: New 3D printed models from Lothian Railway Models

Post by Jim Summers »

Great stuff, Ross.
And anyone who has seen the quality of your other models will be excited by these.
And that Edinburgh tram should be a real winner.
Best of luck,

Jim
alex mcausland
Posts: 30
Joined: Sun Jul 26, 2015 1:00 pm

Re: New 3D printed models from Lothian Railway Models

Post by alex mcausland »

Very good and very impressive.
Hope these models do well Ross
Alex
duncan
Posts: 71
Joined: Fri Aug 24, 2012 8:47 am

Re: New 3D printed models from Lothian Railway Models

Post by duncan »

Well done Ross. Let me know when you are operational & I could let the Gauge 0 Guild know, to include you in their list of traders.
Duncan
RossB
Posts: 201
Joined: Mon Aug 20, 2012 6:53 pm

Re: New 3D printed models from Lothian Railway Models

Post by RossB »

Thanks. I hope to have models available in the next couple of weeks.

Ross
Mike 1
Posts: 140
Joined: Tue Feb 12, 2019 8:46 pm

Re: New 3D printed models from Lothian Railway Models

Post by Mike 1 »

I assume these are just 4mm?

Mike
RossB
Posts: 201
Joined: Mon Aug 20, 2012 6:53 pm

Re: New 3D printed models from Lothian Railway Models

Post by RossB »

4mm and 7mm are planned. Other scales could be done at a future date.

Ross
David Blevins
Posts: 310
Joined: Fri Nov 16, 2012 8:26 pm

Re: New 3D printed models from Lothian Railway Models

Post by David Blevins »

Alongside other comments on Caley Modelling on the Forum - are we promoting this enough !

How about a "Full Page" on what is taking place in Caley Modelling in The True Line, so reaching a bigger audience rather than the Forum.

And again get an article in the Gauge O Guild Magazine for 7mm Modellers and promote the CRA at the same time.

Perhaps you are already going down that road, but at least put yourselves, or "You" to the fore and I wish you every success in your Ventures in Modelling.

David Blevins.
RossB
Posts: 201
Joined: Mon Aug 20, 2012 6:53 pm

Re: New 3D printed models from Lothian Railway Models

Post by RossB »

Just a quick note to say that the 4mm 14ton traders wagon is now available with the 7mm version hopefully following next week.

Ross
Post Reply